The equipment listed under HC 42 series are used for casting by compaction and capping of cement concrete test specimens for carrying out the compressive and transverse strength tests in accordance with various IS Specifications.
These are used for casting cement concrete test specimens for carrying out compressive strength tests as per IS : 516. These moulds are manufactured as per IS specifications. The faces are machined flat within ±0.02 mm tolerance and the inside dimensions are accurate within ±0.2 mm. Each mould i s supplied with a base plate. HEICO 70.6 mm and 150 mm cube moulds carry I.S.I. mark.
Cast Iron
Mild Steel
These Cube moulds are made of steel. The tolerance between faces is maintained at ±0.1 mm and planeness is ±0.03mm. Cube Moulds carry ISI mark.
Cube Mould made of cast iron having an internal size of 100mm with a tolerance of ±0.2 and planeness of ±0.03 mm. Cube Moulds are ISI Marked.
Cube moulds meets the stringent requirment of the above standard and meets the requirement both diamensionalty as well as weight wise.
Cube Mould made of cast iron having an internal size of 150mm with a tolerance of ±0.2 and planeness of ±0.03 mm. Cube Moulds are ISI Marked.
Cube moulds made of cast iron.
Cube moulds made of cast iron.
Cube moulds made of cast iron.
NOTE : Cube moulds mentioned above are the standard cube moulds. However special sizes can be made on request.
Copyright @2022 heicoin.com All rights reserved.
